Learn After The Storm

3/27/2020 (Permalink)

After a harsh storm a lot of damage can occur due to water. At SERVPRO of Western Lehigh County we are here to help you understand. The water damages materials. Wallboard will disintegrate if it remains wet too long; wood can swell, warp, or rot; electrical parts can short out, malfunction, and cause fires or shock.

Mud, silt and unknown contaminants in the water not only get everything dirty, they also create a health hazard.

Dampness promotes the growth of mildew, a mold or fungus that can grow on everything.

The following steps work on all three of these problems. It is very important that they be followed in order.

Lower the humidity: Everything will dry more quickly and clean more easily if you can reduce the humidity in the home. There are five ways for you to lower the humidity and stop the rot and mildew. But you'll have to delay using some methods if you have no electricity.

Open up the house: If the humidity outside is lower than indoors, and if the weather permits, open all the doors and windows to exchange the moist indoor air for drier outdoor air. Your body will tell if the humidity is lower outdoors. If the sun is out, it should be drier outside. If you have a thermometer with a humidity gauge, you can monitor the indoor and outdoor humidity.

On the other hand, when temperatures drop at night, an open home is warmer and will draw moisture indoors. At night and other times when the humidity is higher outdoors, close up the house.

Open closet and cabinet doors: Remove drawers to allow air circulation. Drawers may stick because of swelling. Don't try to force them. Speed drying by opening up the back of the cabinet to let the air circulate. You will probably be able to remove the drawers as the cabinet dries out.

Use fans: Fans help move the air and dry out your home. Do not use central air conditioning or the furnace blower if the ducts were under water. They will blow out dirty air, that might contain contaminants from the sediment left in the duct work. Clean or hose out the ducts first.

Run dehumidifiers: Dehumidifiers and window air conditioners will reduce the moisture, especially in closed up areas.